5pc Ultra Thin Whale Tail Set
5pc Ultra Thin Whale Tail Set with 1/2" tip
There are 100 products.
5pc Ultra Thin Whale Tail Set with 1/2" tip
7 PIECES IN THIS SET
6 PIECES IN THIS SET
These are the (3) largest left and right brace tools.
10dg bend angle moved well back from the working tip to maximise reach
Handle rotated 12dg to improve ergonomics.
Diameter :to: length ratio just right for the power needed.
For hail damage these are a must have for every dent tech.
Brace Tools are made from special high carbon spring steel.
4 PIECES IN THIS SET
This set Includes (4) Picks:
Length: 14" / 35.5cm
Thickness of Shaft: .190" / 4.826mm
Width of shaft: .312”/ 7.92mm
Tip width: 1-1/8”/ 2.8cm
Length: 24" / 60.9cm
Thickness of Shaft: .190" / 4.826mm
Width of shaft: .312”/ 7.92mm
Tip width: 1-1/8”/ 2.8cm
Mushroom Tip w/ Soft Blue PVC 32/16" (2") Working Diameter
Length: 20”/ 50.8cm
Thickness of Shaft: .125" / 3.17mm
Width of shaft: .250”/ 6.350mm
Tip width: 3/4”/ 2.8cm
Length: 10”/ 25.4cm
Thickness of Shaft: .125" / 3.175mm
Width of shaft: .250”/ 6.350mm
Tip width: 3/4”/ 2.857cm
Length: 5”/ 12.7cm
Thickness of Shaft: .125" / 3.175mm
Width of shaft: .250”/ 6.350mm
Tip width: 3/4”/ 2.85cm
Non slip 1.50" Rubber Flip Tip Attachment. Great for shrinking dents fast without leaving high spots. Fits all 5/16-18 threaded rods.
Also good for knocking down crowns.
Length: 10”/ 25.4cm
Thickness of Shaft: .125" / 3.175mm
Width of shaft: .250”/ 6.350mm
Tip width: 1/2”/ 1.270cm
Length: 5”/ 12.7cm
Thickness of Shaft: .125" / 3.175mm
Width of shaft: .250”/ 6.350mm
Tip width: 1/2”/ 1.270cm
1/2'' whale tail tip
3'' length of tool
12.7mm whale tail tip
76mm length of tool
3/4'' whale tail tip
3'' length of tool
19 mm whale tail tip
76 mm length of tool
1-1/8'' whale tail tip
3'' length of tool
28.5 mm whale tail tip
76 mm length of tool
Length: 24" / 60.96cm OAL
Diameter: .306" / 7.7mm
Flag Type: 3” (7.62cm) Curved flag
Length: 18" / 45.72cm OAL
Diameter: .243" / 6.17mm
Flag Type: 2” (5.08cm) Curved flag
Sharp Side Panel Hook 5
Flag: 3''
Diameter: 5/16'
Length: 24''
Sharp Side Panel Hook 4
Flag: 2-1/2''
Diameter: 1/4''
Length: 18''
Length: 24" / 60.96cm OAL
Diameter: .306" / 7.7mm
Other: -Tip is 4.75” (12.1cm) from shaft
Tip is 16.75” (42.5cm) from handle
Long Flag Diameter:.243 (1/4") / 6.35 mm
Length: 24" / 60.9cm
Flag: 4" / 10.1cm
Long Flag Diameter: .306 (5/16) / 7.94 mm
Length: 24" / 60.9cm
Flag: 6" / 15.2cm
Length: 24" (60.9cm)
Diameter: 1/2" (1.27cm)
Includes: R4 tip
1/2” diameter double bend rod that accepts all the interchangeable tips we manufacture.
The pipe handle is perpendicular to the bends and threaded to accommodate one or two handle extensions, for added leverage.
The overall length of the bends is 4 inches (with a tip) and the combined angle is 80 degrees.
Note: A recommended use of the RDI24 would be to stack a combination of E1, E2, and E3 Extension Tips for putting your desired tip closer to the dent when leveraging off a front tire on fenders. This will also allow your hand to keep from hitting the tire when working.
Length: 30" (76.2cm)
Diameter: 1/2" (1.27cm)
Includes: R4 tip
Length: 36" (91.4cm)
Diameter: 1/2" (1.27cm)
Includes: R4 tip
24” interchangeable tip rod including R4 Tip