DESCRIPTION 

Pro Set - A professional could buy this set and show up to any storm and work complete cars start to finish with what’s in this 63 piece set. From the knockdown, s-hook, wedge and window shield to the 2 interchangeable tip rods and the other six other rods… It’s all there.

• Sharp Side Panel Hook 1'' Curve Flag
• Sharp Side Panel Hook 2 1-1/2'' Curve Flag
• Sharp Side Panel Hook 3 2'' Curve Flag
• Sharp Side Panel Hook 4 2-1/2'' Curve Flag
• Sharp Side Panel Hook 5 3'' Curve Flag
• Sharp Side Panel Hook 6 3'' Curve Flag

Side Panel Hook Set 

The Side Panel Hook Set is a set we recommend for every technician. It can easily be part of your foundation of tools used daily.

Length's & Flags:

• 2 x 8'' (20cm) with 1'' and 1-1/2'' flags
• 1 x 12'' (30cm) with 2'' flag
• 2 x 18'' (45cm) with 2-1/2'' and 3-1/2'' ball end flag
• 1 x 24'' (60cm) with 3'' curve flag
• 1 x 30'' (75cm) with with 3-1/2 curve flag 

Diameters:

• 2 x 3/16'' (4.7mm)
• 2 x 1/4'' (6.3mm)
• 1 x 5/16'' (7.9mm)
• 2 x 3/8'' (9.5mm)

The minimum essential PDR Tools for fixing dents on hail damage prone areas.

Brace Tools for for inside of braces on the hood and trunk.

• 3 of our most popular whale tails
• 2 rods
  • 1 x Single Bend 36'' (90cm) with a tapered teardrop design
  • 1 x  Double Bend Interchangeable tip hail rod
• 2 x Extensions for the hail rod
• 1 x wire twisting tool
• 1 x hand tool 3''
• 1 x s hook fulcrum

5pc Ultra Thin Whale Tail Set with 1/2" tip

• 6" Whale Tail -WT06
• 14" Whale Tail- WT14
• 34" Whale Tail- WT34
• 24" Whale Tail- WT24

7 PIECES IN THIS SET

• 6" Whale Tail -WT06
• 10'' Standard Whale Tail- SWT10
• 14" Whale Tail- WT14
• 24" Whale Tail- WT24
• 34" Whale Tail- WT34
• 44" Whale Tail- WT44
• 54" Whale Tail- WT54

• 44” Xtra Wide Whale Tail - XGWT44
• 24” Xtra Wide Whale Tail - XGWT24
• 8” Xtra Wide Whale Tail - XGWT08

• OSHL-Offset Hook/ Left .243 (1/4) x 16" 6.35 mm dia x 406 mm
• OSHR- Offset Hook/ Right .243 (1/4) x 16" 6.35 mm dia x 406 mm

• 6" Heavy Brace Tool Left- BLH06
• 6" Heavy Brace Tool Right- BRH06
• 10" Heavy Brace Tool Right- BRH10
• 10" Heavy Brace Tool Left- BLH10
• 24" Brace Tool Right- BR24
• 24" Brace Tool Left- BL24
• 18" Brace Tool Right- BR18
• 18" Brace Tool Left- BL18
• 8" Brace Tool Left- BL08
• 10" Brace Tool Left- BL10
• 8" Brace Tool Right- BR08
• 10" Brace Tool Right- BR10

• 8" Wire Tool- W408
• 8" Wire Tool- W508
• 16" Wire Tool- W516
• 16" Wire Tool- W616
• 24" Wire Tool- W624

• 24" Wire Tool- W724
• 36" Wire Tool- W836
• 36" Wire Tool- W736
• 48" Wire Tool- W848
• 48" Wire Tool- W748

• 4" Hand Tool- HT04
• 3" Hand Tool- HT03
• 2" Hand Tool- HT02
• 1" Hand Tool- HT01

6 PIECES IN THIS SET

• 14" Brace Tool Right- BR14
• 18" Brace Tool Right- BR18
• 24" Brace Tool Right- BR24
• 14" Brace Tool Left - BL14
• 18" Brace Tool Left- BL18
• 24" Brace Tool Left- BL24

These are the (3) largest left and right brace tools.

10dg bend angle moved well back from the working tip to maximise reach

Handle rotated 12dg to improve ergonomics.

Diameter :to: length ratio just right for the power needed.

For hail damage these are a must have for every dent tech.

Brace Tools are made from special high carbon spring steel.

4 PIECES IN THIS SET

• 8" Brace Tool Left- BL08
• 10" Brace Tool Left- BL10
• 8" Brace Tool Right- BR08
• 10" Brace Tool Right- BR10

This set Includes (4) Picks:

• PCK14 .. 14'' x 1/4'' DIA
• PCK18 .. 18'' x 5/16'' DIA
• PCK24 .. 24'' x 3/8'' DIA
• PCK30 .. 30'' x 7/16'' DIA

5 PIECES IN THIS SET

• Window Shield-WSHLD
• Small Knock Down- SMKD
• Large Knock Down- LGKD
• Window Wedge- WDG
• S-Hooks- SHKS

• Window Shield-WSHLD
• S-Hooks- SHKS
• 4" Orange Aluminum Knock Down w/ Tip
• Handle Extender-HNDLX
• Window Wedge- WDG

Length: 14" / 35.5cm

Thickness of Shaft: .190" / 4.826mm

Width of shaft: .312”/ 7.92mm

Tip width: 1-1/8”/ 2.8cm

Length: 24" / 60.9cm

Thickness of Shaft: .190" / 4.826mm

Width of shaft: .312”/ 7.92mm

Tip width: 1-1/8”/ 2.8cm

Length: 20”/ 50.8cm

Thickness of Shaft: .125" / 3.17mm

Width of shaft: .250”/ 6.350mm

Tip width: 3/4”/ 2.8cm

Length: 10”/ 25.4cm

Thickness of Shaft: .125" / 3.175mm

Width of shaft: .250”/ 6.350mm

Tip width: 3/4”/ 2.857cm

Length: 5”/ 12.7cm

Thickness of Shaft: .125" / 3.175mm

Width of shaft: .250”/ 6.350mm

Tip width: 3/4”/ 2.85cm

Length: 10”/ 25.4cm

Thickness of Shaft: .125" / 3.175mm

Width of shaft: .250”/ 6.350mm

Tip width: 1/2”/ 1.270cm

Length: 5”/ 12.7cm

Thickness of Shaft: .125" / 3.175mm

Width of shaft: .250”/ 6.350mm

Tip width: 1/2”/ 1.270cm

1/2'' whale tail tip
3'' length of tool

12.7mm whale tail tip
76mm length of tool

3/4'' whale tail tip
3'' length of tool

19 mm whale tail tip
76 mm length of tool

1-1/8'' whale tail tip
3'' length of tool

28.5 mm whale tail tip
76 mm length of tool

Length: 24" / 60.96cm OAL
Diameter: .306" / 7.7mm
Flag Type: 3” (7.62cm) Curved flag

Length: 18" / 45.72cm OAL
Diameter: .243" / 6.17mm
Flag Type: 2” (5.08cm) Curved flag

Sharp Side Panel Hook 5

Flag: 3''

Diameter: 5/16' 

Length: 24''

Sharp Side Panel Hook 4

Flag: 2-1/2''

Diameter: 1/4'' 

Length: 18''

Length: 24" / 60.96cm OAL
Diameter: .306" / 7.7mm
Other: -Tip is 4.75” (12.1cm) from shaft
Tip is 16.75” (42.5cm) from handle

Long Flag Diameter:.243 (1/4") / 6.35 mm
Length: 24" / 60.9cm
Flag: 4" / 10.1cm

Long Flag Diameter: .306 (5/16) / 7.94 mm
Length: 24" / 60.9cm
Flag: 6" / 15.2cm

Length: 24" (60.9cm)
Diameter: 1/2" (1.27cm)
Includes: R4 tip

1/2” diameter double bend rod that accepts all the interchangeable tips we manufacture.

The pipe handle is perpendicular to the bends and threaded to accommodate one or two handle extensions, for added leverage.

The overall length of the bends is 4 inches (with a tip) and the combined angle is 80 degrees.

Note: A recommended use of the RDI24 would be to stack a combination of E1, E2, and E3 Extension Tips for putting your desired tip closer to the dent when leveraging off a front tire on fenders. This will also allow your hand to keep from hitting the tire when working.