Mushroom Tip w/ Soft Blue PVC 24/16" (1 1/2") Working Diameter

Delrin Knockdown. Very similar to our Acrylic knockdown - but the material is Delrin. This is the smaller tip diameter version

T- Handle Blunt Tip
Diameter: .243" (1/4)" / 6.35 mm
Length: 14" / 35.5cm

·        Cold glue 17g to 20g + silicone box.

·        Dourado cold glue is a premium glue developed to work at various temperatures, with the key feature of not needing to be heated to activate the glue.

·        A world pioneer in cold glue for paintless dent repair, developed by Sérgio Pillon.                  

·        Gold - for various temperatures from 5°C to 40°C, premium cold glue.

·        Ideal for automotive repairs, the Cold Glue system was created to assist technicians in precise and quick repairs, pulling out both simple and complex dents.

This round Glexo v2 tab for PDR hail repair has a diameter of 25mm/ 0.98" and is used in PDR to work with Glexo hail cold glue. The tab is made of high-strength stainless steel, has a great appearance and high reliability. The working surface is polished to improve the adhesion of PDR cold glue, which eliminates its separation from the tab during operation. The tab is equipped with a patented proprietary quick fastening system with an O-ring for reliable and quick fixation. Fastening to the slide hammer is simple and intuitive, it is carried out by twisting movements after inserting the asymmetric nut of the tab into the seat of the slide hammer.

This is the STRONGEST crease tab this size you can find. When your glue pulling reaches a very high level of perfection, you'll need and want to do precision work and key sized small tabs are key to that success.

This little crease tab is sure to impress you with it's precise snappy pulls!

This kit includes 12 smooth Rectangular tabs used for Crease Style Pulling and 12 smooth Round tabs for hail repair and every day round dents. 

Super dope glue pulling with this kit! The faces have a little more engineered flex to snap that center of the damage right up!

We sell them all together as a Variety Pack which has TWO of every size we make:

Round Tabs 9mm,12mm,15mm,20mm,25mm,30mm

Crease Tabs 26mm,32mm,38mm,51mm,70mm,83mm

Introducing the Mega Hail Kit (GGDCMH30)

If you do hail, just buy this pack and thank us later. The engineered flex of the dead center construction along with the the power and durability of the Gang Green material make these the new standard for hail. Slide or lifter, they don't care.

Dent Reaper Dead Center Hex Tabs combine the amazing Dead Center Technology developed by Keco with a design twist from Jon Videen at Dent Reaper. The stepped tab face increases the strength in the center of the tab while providing extra adhesion power and flex at the tab edges.

• Patented Dead Center Technology - the specialized neck to face ratio provides the best possible rigid center pull with flex along the edges to avoid overpulling
• Hexagonal Tab Shape - extreme strength and rigidity, perfect for pulling on panel edges and prevents unused tabs from rolling
• Stepped Tab Thickness - increases force at the center of the pull while increasing adhesion with a larger total surface area
• KECO Ice Material - extremely strong and rigid formula.

Dead Center® Finishing Tabs.

• Patented Dead Center Technology - the specialized neck to face ratio provides the best possible rigid center pull with flex along the edges to avoid overpulling
• 15 mm Smooth Face - allows glue to adhere for the strongest possible pull
• Ice Material - extremely strong and rigid formula allows for incredible pull strength and maximum energy transfer

At Fully collapsed it measures 14.5".

• Notches every inch for adjustment
• Maximum expansion is 23.5"
• Constructed of aluminum with rubber end caps to keep in place and from scratching.

prop , hood prop

Metal Window Shield

This metal window shield is mirror finished. Our testers told us that is helped them see the inside of panels for access points and bracing.

• Durability: The window shield functionality will last a long time. The mirror polish will scratch with use. Our testers found that after scratching the reflection was still useful.
• Dimensions: 10''w x 14''h with a 1.5'' flange 
• Gauge: 20 Gauge 
• Metal Type: Stainless steel

Comes with a bag for carrying.

Non slip 1.00" Rubber Flip Tip Attachment. Great for shrinking dents fast without leaving high spots. Fits all 5/16-18 threaded rods.

Bullet Tip w/ Red PVC 32/16" (2") Working Diameter

Bullet Tip w/ Red PVC 3/16" Working Diameter

T- Handle Flat Tip
Diameter:.243" (1/4)" / 6.35 mm
Length: 14" / 35.5cm

Length: 36” / .91m
Diameter: 7/16” or 1.11cm
Tip Angle: 20 and 45 Degrees
Tip Type: Blade

Length: 24" / 60.96cm OAL
Diameter: .306" / 7.7mm
Flag Type: 3” (7.62cm) Curved flag

Length: 14”/ 35.5cm

Thickness of Shaft: .190" / 4.826mm

Width of shaft: .375”/ 9.525mm

Tip width: 1-1/2”/ 38.1mm

Length: 20”/ 50.8cm

Thickness of Shaft: .125" / 3.17mm

Width of shaft: .250”/ 6.3mm

Tip width: 1/2”/ 1.2cm

Length: 20”/ 50.8cm

Thickness of Shaft: .125" / 3.17mm

Width of shaft: .250”/ 6.350mm

Tip width: 3/4”/ 2.8cm

• Window Shield-WSHLD
• S-Hooks- SHKS
• 4" Orange Aluminum Knock Down w/ Tip
• Handle Extender-HNDLX
• Window Wedge- WDG

• 44” Xtra Wide Whale Tail - XGWT44
• 24” Xtra Wide Whale Tail - XGWT24
• 8” Xtra Wide Whale Tail - XGWT08

7 PIECES IN THIS SET

• 6" Whale Tail -WT06
• 10'' Standard Whale Tail- SWT10
• 14" Whale Tail- WT14
• 24" Whale Tail- WT24
• 34" Whale Tail- WT34
• 44" Whale Tail- WT44
• 54" Whale Tail- WT54

The minimum essential PDR Tools for fixing dents on hail damage prone areas.

Brace Tools for for inside of braces on the hood and trunk.

• 3 of our most popular whale tails
• 2 rods
  • 1 x Single Bend 36'' (90cm) with a tapered teardrop design
  • 1 x  Double Bend Interchangeable tip hail rod
• 2 x Extensions for the hail rod
• 1 x wire twisting tool
• 1 x hand tool 3''
• 1 x s hook fulcrum

Pillon PDR Hot Glue - Gold 1kg.

An Ultra strong hot glue ideal for large or deep dents, needs alcohol or a releasing agent to be removed.

Optimal temperature range for best performance between 5-40°C

1 Small Smart spring recoil Sliding Hammer

6 Cold Glue tabs 

Black Mamba glue was developed for large dents and bodywork repairs.

Ideal for automotive repairs, the Cold Glue system was created to assist technicians in precise and quick repairs, pulling out both simple and complex dents.

Black - For large dents, used in auto body repair, 10°C to 28°C

Cold glue 17g to 20g + silicone box.

Blue cold glue is a glue developed to work in higher temperatures, on hot days.

A world pioneer in cold glue for paintless dent repair, developed by Sérgio Pillon.

Ideal for automotive repairs, the Cold Glue system was created to assist technicians in precise and quick repairs, pulling out both simple and complex dents.

Blue: 30°C to 40°C

·        FAST PDR style blending hammer

·        ISO metric M8 thread NOT compatible with interchangeable push tip rods                                     

·        Interchangeable stainless-steel tips                                                                                                                                                                                                                       

·        The Magnetic handle is equipped with rubber rings to prevent the hammer from slipping during use   

Adhesive composition (PDR cold glue) Glexo for high application temperatures, above 86°F /30°C. Uncompromising performance in any job in hot conditions. Under standard temperature conditions, the composition will appear solid, and its adhesive properties will appear in hot weather.

The adhesive composition is intended for use with Glexo metal PDR tabs, but it can also be applied separately using special techniques. A feature of the composition is its pronounced non-Newtonian behavior. So with a sharp application of force, the cold glue becomes much harder, allowing the maximum force from the tool to be transferred to the repaired surface. The remains of the composition are removed from the surface with the bulk on the tab. 

Adhesive composition (PDR cold glue) Glexo is perfect for normal application temperatures below 86°F/30°C. It promises unwavering performance across all tasks and conditions.

This PDR cold glue is designed for use with Glexo metal PDR tabs, but it can also be applied separately using specific techniques. A key characteristic of this glue is its significant non-Newtonian behavior. In other words, when you apply a quick force, the glue becomes much harder, allowing the maximum power from the PDR tool to be transferred to the surface being repaired. The leftover glue is then removed from the surface along with the majority on the tab. If you need to detach the PDR cold glue from the surface that's being fixed, you should avoid sudden movements and separate it smoothly.